YD-151K
Epoxy Curing Agent, Amine value: 390±30, Viscosity (mpa·s/25℃): 200-1000.
Epoxy Curing Agent, Amine value: 390±30, Viscosity (mpa·s/25℃): 200-1000.
YD-151K is a fatty amine modified epoxy hardener with light color and very good initial hardness and strength build-up time. It is recommended to be applied in stone dry-hanging adhesive pure white formula, epoxy joints and other fields.
| Appearance | Colorless transparent liquid |
| Viscosity (25℃) | 200–1000 |
| Amine value | 390±30 |
| Relative density (g/ml/25℃) | 0.98 |
| Active Hydrogen Equivalent Weight (AHEW) | 98 |
| Grams of epoxy curing agent required for 100 grams of E-51 epoxy resin |
50 |
| Property | Value |
| Pot life (25℃, 100 g) | 10–25 min |
| Film Drying Time (3 mm, 25℃) | 2–4 h |
| Shore D Hardness (after 48 hours) | ≥82 |
| Steel-to-steel shear① | ≥15 MPa |
| Bending elasticity | > 2000 |
Basic data is based on the E-51 epoxy resin (E-51 is bisphenol A type, with an epoxy equivalent of 180-190). Note: ① Above experimental data: 128 resin: 151K curing agent = 100:50, add two times the mass of powder. Curing conditions: 25℃×24h, 80℃×1h
It should be sealed in its original packaging and stored in a dry place at a temperature range of 0-40°C (the temperature must not fall below 0°C). It should not be placed in direct sunlight.
